Moto Wrapping: Guide to the best films
Moto Wrapping is a particular technique that allows you to change the color of your two- and four-wheeled vehicle. But be careful: it is not a question of intervening with paints and other rather invasive techniques on the "bodywork", but more simply applying a covering film.
The benefits are obvious. With this technique the original color is not damaged and is a safe and effective procedure. It also allows you to protect the underlying paint from scratches, contracting - one day - to restore the original state of the vehicle without particular problems.
This technique can be done with the intervention of expert and professional staff. In fact, it will be necessary to choose the design and color of the film, taking advantage of the advice of an expert, and then we will proceed to carry out the total or partial coating through a quick and precise application. Although this is a simple and quick relative procedure, in reality it is essential to try to proceed with great attention and attention to detail.
Many, of course, want what the duration is. Usually, the film is quite resistant to washing and external temperatures, thus allowing the motorcyclist not to necessarily have to worry about the quality over time of this small but important investment.
If you also take into consideration that many wrapping manufacturers guarantee a 2-3 year warranty on their product. It follows that in the event of problems and defects, it is still possible to contact the manufacturer in order to obtain a free replacement of the film.
However, the film is removable at any time, leaving the original color and paint intact. Who can therefore go back to basics without any problem, inconvenience and, above all, saving compared to the costs that would have to be faced in the event of a new painting.
Regarding the cost of motorcycle wrapping, it should be emphasized that the cost of this operation is lower than traditional painting, thus allowing us to affirm that this procedure is much cheaper than the main and more invasive alternative. We can also say that the cost of packaging is now within everyone's reach. In any case, the cost must also be weighted in relation to the many benefits that can be obtained by following this procedure.
In fact, we remind you that with wrapping it will be possible to obtain the most personalized prints, and which contribute to the protection of the bodywork against the signs of wear, which are created with normal use of the bike. Furthermore, once the film has been removed, the wrapped vehicle is like new, like the original ready to be resold or to be customized again, or even to be used in its original version.
The procedure for wrapping your motorcycle is a particularly convincing choice for all those who may wish to customize their favorite two wheels, but without intervening too invasively on the vehicle.
Events related to motion wrapping
Compared to car wrapping, born in the United States in the 90s and then spread to other countries (including Italy), this procedure linked to motorcycles is not yet so popular. Not only at the level of procedure to customize your bike, but reed on the level of events. In our country, in fact, it is to come across events in which more difficult motorcycle manufacturers can compete for their materials, or your own with this method competes more beautiful and original.
One of the few motorcycle wrapping events staged in Italy was “HI-Wrap. Customize Your Bike ”, on 19 and 20 March 2016 will print the headquarters of the Harley Davidson dealer Onorio Moto in Correggio (RE). During these two days, the "top players" on the Italian market as regards wrapping, materials and digital printing have staged the decoration of the motorcycles live by opening a workshop on the site at Onorio Moto Harley Davidson dealer in Correggio. Each participant was able to wrap a detail of his bike with innovative materials and original patterns.
The hope is that this is not an isolated event and that, with the ever major diffusion of motorcycle wrap, there are other events that contribute to manifesting this method of decorating motorcycles.
Where to buy films
If you choose wrapping to customize your bike, then you need to think through every decision. Not only, as previously mentioned, specialized people should be called to carry out this operation in the best way, but a film of excellent quality should also be chosen. It happens, in fact, online and beyond, to find advantageous offers which however reserve a low-level material. There is therefore the possibility that the bike we wanted does not come out or that the film lasts too short, thus having to spend more money on a new operation. To avoid these inconveniences, here are some tips on which films to buy for your motorcycle.
When it comes to films, you can't help but start with Avery Denninson. It is a US company, one of the most popular in the production of films (for motorcycles and cars, but also of other kinds). A range of solutions, in terms of colors and effects given to your bike, which all have as common denominator the competence of the staff, the quality of the materials and the application techniques.
On our website Vulturbike.com, by accessing the appropriate section dedicated to wrapping films , there are products of various kinds in the field of wrapping. They range from films of various colors that are good for any type of motorcycle to others that are specific to a particular model. There are also useful tools to complete this operation, in case the user chooses to do it on their own.
